Do you know the floor spring glass door? Floor spring door refers to the door that relies on elastic closing and opening, also known as "automatic door". Spring glass door is one of the important decorative building materials in home decoration, so do you know about the floor spring glass door? What should you pay attention to when removing the floor spring glass door? Let's learn about it together.
1. First of all, you must determine whether your floor spring door is equipped with a solid door frame (or aluminum frame) or a glass clip, with a solid door frame accessory: open the door to a 90-degree positioning point of view, and pad it with something At the lower corner of the door opening end, one holds the door by yourself, and the other uses a screwdriver to adjust the accessory screws on the top of the door. When the screws are lowered, the axis of the accessory will shrink upwards, and the door can be removed by adjusting it to a certain height.
2. With glass clamps: remove the glass upper clamp and the stainless steel cover of the lower clamp on the door, open the door to a 90-degree positioning point of view, use something to pad the lower corner of the door opening end, one is holding the door by yourself, and the other Use a 6-point key to unscrew the screws that fix the shaft sleeves on the upper and lower door clips of the door, and remove the shaft sleeve to take the door down. If only the upper door clamp shaft sleeve of the door is taken off, the door is slanted and the door can be taken down even if the position is sufficient, so there is no need to remove the lower door clamp shaft sleeve of the door.